Car Toys Kenwood 10 Inch Bass Pack Package PPKEN1HO

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare

Currency: USD
Available At: Car Toys

$379.96

Buy Now

SKU: PPKEN1HO Categories: ,

Car Toys Kenwood 10″ Bass Pack Package PPKEN1HO Kenwood eXcelon X501-1 Class D Mono Power Amplifier X Series Amplifiers X Series Amplifiers provide a powerful solution in a compact design ideal for upgrading your car audio system. The reliability of the thermal management system instantaneously controls amplitude and ensures uninterrupted sound reproduction when high output drives up temperatures. Experience the luxury of choice afforded by Kenwood’s compact engineering. Dual Sigma Drive This advanced negative feed back circuit improves damping factor and increases accuracy and sound quality. When a signal is passed to a subwoofer, like a 50Hz note, the speaker will move and create the note. However, because the speaker has mass and a suspension, it won’t stop moving once it’s in motion. This extra movement (sound) creates a type of distortion that’s not part of the original signal. The negative feedback circuit senses this unwanted movement and sends out an opposite pulse to stop the speaker like an electronic brake. Small Size Big Power The X501-1 is small in size but with its tremendous sound output, it is extremely versatile. It can be installed in vehicles where space is limited and is perfect for vehicle owners who don’t want to sacrifice cargo room or who prefer hidden installations. General Features MAX Power 1000W RMS Power 300W (4Ω) RMS Power 500W (2Ω) Speaker Level Input Signal Sensing Turn-On Variable Low Pass Filter Bass Boost (W)6-11/16″ x (H)2-3/16″ x (D)7-3/8″ CEA-2006 Primary Ratings Power Output 300 Watts RMS x 1 at 4 Ohms and ≤1%THD+N Signal-to-Noise Ratio 85dBA (Reference: 1Watt into 4Ohms) Maximum Power Output Max Power 1000W Rated Power Output at 14.4V SUB (4 Ohms) 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD) SUB (2 Ohms) 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD) Specifications Signal to Noise Ratio 100dB (Reference: Rated Power into 4Ohms at 14.4V) Frequency Response 20Hz-200Hz (+0dB, -3dB) Input Impedance 10k ohm Speaker Impedance 4Ω (2Ω to 8Ω allowable) Audio Section Low-Pass Filter 50Hz-200Hz, -24dB/oct High-Pass Filter – Bass Boost 40Hz, 0dB – +18dB RCA Input Sensitivity 0.2[V] – 5.0 [V] Speaker Level Input Sensitivity 4.0[V] – 12.0 [V] Terminals Battery & Ground M6 Screw Type Terminal Block Speaker Output M4 Screw Type Terminal Block General Dimensions(WxHxD) 6-11/16 x 2-3/16 x 7-3/8 [inch] Operating Voltage 14.4V(11-16V allowable) Current Consumption 34 [A] Key Features CEA-2006 Compliant 2 Ohms Load Capability Speaker Level Input with Signal Sensing Turn-on Power MOS-FET Switching Power Supply Extruded Aluminum Heat Sink Design Kenwood eXcelon KFC-XW100 (2) 10″ eXcelon Subwoofer Kenwood’s Performance and Reliability Low frequency output has been improved by increasing the cone area without changing the cutout diameter. By adopting a “Stress-free Spider” and a “Thermal Efficient System” the mechanical and thermal durability has also been improved dramatically delivering smooth and strong bass sound with long lasting reliability. Square Array Pattern By using a polypropylene woofer cone with a “Square Array” pattern, cone strength is increased and low frequency performance is enhanced. General Features Subwoofer Type: 10″ PP Cone Peak Power: 1300 W RMS Power: 300 W Frequency Response: 32Hz-300Hz Impedance: 4 Ω Mounting Depth: 4-9/16inch Specifications Size 10in Diaphragm PP Cone Black Surround Rubber Basket Steel Black Magnet Ferrite φ120*φ60*t15*2 Dimensions Width 10-13/16in Height 10-13/16in Cutout Diameter 9-1in Depth 5-3/8in Mounting Depth 4-9/16in Weight Gross Weight 10.1lbs Weight of Woofer Magnet 43.3oz Power Handling Peak Power (KITS SPEC) 1300W Rated Power (CEA SPEC) 300W Sensitivity 81db / W at 1m Frequency Response 32Hz-300Hz Impedance 4ohms Special Feature Over Sized Diaphragm Shallow Design/Same as XW10 Fitting Area 8AWG Push Terminal Dual Ventilation Bassworx RP210RGDual 10″ Ported Subwoofer Enclosure Intricately designed with audio excellence in mind, this series is sure to leave its impression on your eyes and ears. The highly irregular interior lends to an acoustically advanced environment for your subwoofers, eliminating the nasty standing waves that lead to acoustic coloration. We engineered the reference series with a complexity that is anything but average. Our proprietary Max-Flow-Port will deliver an extra boost to your bass performance in the sub-40Hz frequency range. Key features: Wedge shape profile Max Flow Port with sub-40Hz tuning Cosmetically finished baffle panel 1″ baffle & 3/4″ MDF throughout Rabbet and dado construction Flush mounted push post terminal.

Reviews

0.0
0
0
0
0
0

Be the first to review “Car Toys Kenwood 10 Inch Bass Pack Package PPKEN1HO”

Your email address will not be published. Required fields are marked *

There are no reviews yet.

Related Products

Added to wishlistRemoved from wishlist 0
Add to compare
Added to wishlistRemoved from wishlist 0
Add to compare
Added to wishlistRemoved from wishlist 0
Add to compare
Spino Mart- Daily Deals
Login/Register access is temporary disabled
Compare items
  • Total (0)
Compare